Difference between revisions of "R"
From Knoesis wiki
| Line 5: | Line 5: | ||
*[http://knoesis.org/matvocab/RTM RTM] | *[http://knoesis.org/matvocab/RTM RTM] | ||
*[http://knoesis.org/matvocab/RTV RTV] | *[http://knoesis.org/matvocab/RTV RTV] | ||
| + | *[http://knoesis.org/matvocab/Range Range] | ||
| + | *[http://knoesis.org/matvocab/Rate_of_Creep Rate of Creep] | ||
| + | *[http://knoesis.org/matvocab/Residual Residual] | ||
*[http://knoesis.org/matvocab/Rockwell_hardness Rockwell hardness] | *[http://knoesis.org/matvocab/Rockwell_hardness Rockwell hardness] | ||
| + | *[http://knoesis.org/matvocab/Runout Runout] | ||
*[http://knoesis.org/matvocab/random_pattern random pattern] | *[http://knoesis.org/matvocab/random_pattern random pattern] | ||
*[http://knoesis.org/matvocab/reaction_injection_molding_(RIM) reaction injection molding (RIM)] | *[http://knoesis.org/matvocab/reaction_injection_molding_(RIM) reaction injection molding (RIM)] | ||
Revision as of 20:03, 30 April 2014
- R-ratio (R-factor)
- RFI
- RIM
- RRIM
- RTM
- RTV
- Range
- Rate of Creep
- Residual
- Rockwell hardness
- Runout
- random pattern
- reaction injection molding (RIM)
- reinforced plastics
- reinforced reaction injection molding (RRIM)
- reinforcement
- relaxation time
- relaxed stress
- release agent
- release film
- release paper
- residual strain
- residual stress
- resilience
- resin
- resin content
- resin film infusion (RFI)
- resin pocket
- resin system
- resin transfer molding (RTM)
- resin-rich area
- resin-starved area
- resinoid
- resistivity
- resite
- resitol
- resole
- reverse helical winding
- reverse impact test
- rheology
- rib
- rise time
- room-temperature curing adhesive
- room-temperature vulcanizing (RTV)
- roving
- roving ball
- roving cloth
- rubber
- rule of mixtures
- rupture
